Computer Parts

Ruggedized In-Vehicle AI Fanless System Based on NVIDIA® Jetson Orin™ NX

• Ruggedized IP67 waterproof fanless design
• Embedded with NVIDIA® Jetson Orin™ NX up to 100 TOPS
• 2 x GbE and 4 x PoE with IEEE 802.3af compliance
• 2 x USB 3.0, 1 x CANbus, 1 x HDMI
• Supports 2 x mPCIe, 1 x M.2 3052, 1 x M.2 2280
• Supports Allxon 24/7 remote monitoring and OTA deployment

Product Details:

Quiet 4U Rackmount Chassis for ATX/uATX Motherboard or Full-size SBC with Dual System Support

• Supports either an ATX/CEB/EEB single/dual processors motherboard or a PICMG backplane with up to 15 slots
• Supports one or two systems in a single chassis
• Shock-resistant disk drive bay design holds up to two 5.25" and two 3.5" disk drives
• LED indicators and alarm notification for system fault detection and network connection
• Low noise system fans with fan speed control
• Built-in Intelligent System Module enables whole system fan control and remote manageability

Product Details:

Cost-effective Desktop Chassis for MicroATX Motherboard

• Cost-effective desktop chassis for MicroATX motherboard
• Supports four expansion slots
• Supports one 5.25" ODD and two 3.5" HDD
• Front-accessible dual USB 2.0
• Equipped with 300 W SFX power supply

Product Details:

Compact 4U Rackmount Chassis for Half-size SBC or ATX/MicroATX Motherboard

• Compact 4U rackmount chassis, with only 348mm depth
• Supports 14-slot BP for half-size SBC or ATX/MicroATX motherboard
• Shock-resistant disk drive bay holds one internal 2.5", and two front-accessible 3.5" drives, plus one slim optical disk drive. Optionally, the two front-accessible 3.5" slots may be converted to two or even four 2.5" mobile SATA HDD trays by using optional part IDT-3120E
• Supports 80plus single power supply
• Front-accessible system fan without opening top cover for easy maintenance
• LED indicators and audible alarm notification for system fault detection
• Smart fan speed control for system fans
• Remote management (with SUSIAccess 2.1)

Product Details:

Desktop/Wallmount Chassis with front I/O Interfaces for mATX Motherboard

• With front I/O interface and four expansion slots
• Shockproof drive bay for one 5.25" ODD and two 3.5" HDDs
• LED indicators for power status and HDD activity
• Support four half-size add-on cards

Product Details:

250 kS/s, 16-bit, 8-ch, Simultaneous Sampling, Multifunction PCIE Card

• 8 differential simultaneous sampling analog inputs, up to 250 kS/s, 16-bit resolution
• 2 analog outputs, up to 3 MS/s, 16-bit resolution
• Full auto-calibration
• 2 analog triggers and 2 digital triggers for AI/O
• 32 programmable DI/Os with interrupt functions
• Four 32-bit programmable counters/ timers/ encoders
• Board ID switch
• Support for Microsoft Windows 10/11

Product Details:

2U Rackmount Chassis for ATX Motherboard with 4 Hot-Swap SAS/SATA HDD Trays and RPS

• Supports ATX motherboard with dual processors
• Four shock-resistant hot-swap disk trays supporting 3.5" or 2.5" SAS/SATA drives for RAID 5/10 application, one slim ODD, and two 2.5" internal drives
• Dual front USB 3.0 ports
• Supports 80plus single or redundant power supply up to 550W

Product Details:

100 kS/s, 12-bit, 16-ch Universal Multifunction PCI Card

• 16-ch single-ended or 8-ch differential or a combination of analog input
• 12-bit A/D converter, with up to 100 kHz sampling rate
• Onboard programmable counter
• Two 12-bit analog output channels
• 16-ch digital input and 16-ch digital output
• Automatic channel/gain scanning
• Onboard FIFO memory (4,096 samples)
• Programmable gain
• BoardID™ switch

Product Details:

Product Details:

Product Details:

Product Details:

Product Details: